How to Model a Hose Around a 90 Degree Bend - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » How to Model a Hose Around a 90 Degree Bend

Topic Options

#41755 - 03/19/11 11:13 AM How to Model a Hose Around a 90 Degree Bend
Overstressed Member Registered: 10/22/10 Posts: 1 Loc: New York	How would one model in CII a hose that is attached to two perpendicular pipe runs and forms a 90 degree bend between the two runs?
Top

#41757 - 03/19/11 11:27 AM Re: How to Model a Hose Around a 90 Degree Bend [Re: Overstressed]
danb Member Registered: 04/22/05 Posts: 1453 Loc: ...	Caesar can not handle a hose. But you should ask your vendor about the matter. They can tell you what movements are restricted and what are allowed. regards, _________________________ Dan
Top

#41758 - 03/19/11 11:31 AM Re: How to Model a Hose Around a 90 Degree Bend [Re: danb]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	There are many earlier posts dealing with "flexible hose" elements. Use the [Search] facility. _________________________ Regards, Richard Ay - Consultant
Top

View All Topics

Moderator: Denny_Thomas, uribejl

0 registered (), 34 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

April
Su	M	Tu	W	Th	F	Sa
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)