Registered: 03/06/09
Posts: 17
Loc: Connecticut, US
I used user defined materials for stress analysis. An error came up as below: 99E Expansion Coefficients for user defined materilas must be set by the user. I do not know where / how to input it. Thanks, Flames
Registered: 12/13/99
Posts: 6226
Loc: Houston, Texas, USA
Just put the expansion coefficient into the temperature field, instead of the temperature. Check the "help text" here, it explains what to do and what the expected "units" are.
_________________________
Regards, Richard Ay - Consultant