hello,
i need ur help to generate the isometric in cadworx.
the situation is i modeled a whole plant in cadworx and while try to generate the isometric i got a reply saying
"
Only components drawn with the ISOGEN interface active are allowed..."
"Command: _ISOGENOUT
Error reading isometric directory..."
"Command: _ISOGENOUT
Enter an option [Line number/Select components] <Select components>: S

Select objects: 2 found, 1 group

Select objects: 2 found (2 duplicate), 1 group, 2 total

Select objects: Specify opposite corner: 6 found, 3 groups, 8 total

Select objects: Specify opposite corner: 4 found (4 duplicate), 2 groups, 8
total

Select objects: Specify opposite corner: 4 found (2 duplicate), 2 groups, 10
total

Select objects:

Component not ISOGEN enabled [1]: REDUCER, CONC S/STD, ASTM A-234 GR WPB
Coordinates for component [1]: -52097.8921,73655.7477,1274.9663
Component not ISOGEN enabled [2]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [2]: -51881.9921,73655.7477,1274.9663
Component not ISOGEN enabled [3]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [3]: -51881.9921,73503.3477,1274.9663
Component not ISOGEN enabled [4]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [4]: -51881.9921,73503.3477,1027.0000
Component not ISOGEN enabled [5]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [5]: -55230.3541,73655.7477,1274.9663

Could NOT process 5 component(s) due to permissions failure...

Only components drawn with the ISOGEN interface active are allowed...
No components were written to file..."



like this?

Mods, this probably belongs in the ISOGEN sub-forum.

As its says, components must be drawn with Plant Professional for them to work with ISOGEN. Those components must have be drawn with Plant Basic.

There is a thread in the ISOGEN forum that covers this. The drawing needs to be converted to ISGGEN ready with the help of technical support. I will say this is a very easy task and goes quickly, even for several models.