I wouldn’t normally combine the U1+U2 (L22 above) or Win1+Win2 (L24 above) together without adding a scale factor. What that is doing is changing the wind or seismic direction to 45 degrees off the Caesar II coordinate axes, but it is also making the skewed wind and seismic forces 1.4 times larger than defined in the input. I would probably do something like this:
L22=0.707L13+0.707L14
Also note that you don't review forces, moments, restraint loads, or displacements for any combination case (L11 to L35).
Edited by Loren Brown (06/30/10 09:28 AM)
_________________________
Loren Brown
Director of Technical Support
CADWorx & Analysis Solutions
Intergraph Process, Power, & Marine
12777 Jones Road, Ste. 480, Houston, TX 77070 USA