#32524 - 01/12/10 05:54 AM
PVElite 2010 INSTALLATION ERROR
|
Member
Registered: 01/06/10
Posts: 6
Loc: india
|
HI, 1)we have installed new PVElite 2010 in two pcs.We faced two problems while opening PVElite.
ERROR 1 unable to access HASP SRM RUN TIME ENVIRONMENT(H0033)
ERROR 2 PVElite application encountered a problem needs to close .we are sorry for inconvenience. I installed in new pc we cant able to open the PVElite
suggest me solve the issue.
regards JL
Attachments
976-Document1.pdf (811 downloads)
|
Top
|
|
|
|
#32533 - 01/12/10 07:26 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: josephlee]
|
Member
Registered: 08/19/08
Posts: 87
Loc: Houston,TX, USA
|
Hi Josephlee,
I can help you with this, please send your query to techsupport@coade.com and mention Luis on the Subject line. Please mention what type of HASP ESL key you have (network or local).
_________________________
Best Regards, Luis Sanjuan
|
Top
|
|
|
|
#32537 - 01/12/10 08:14 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: Luis Sanjuan]
|
Member
Registered: 12/23/99
Posts: 347
Loc: Houston,TX,USA
|
Hi Joseph,
You can also try this:
1. Restart the machine. 2. Install the device drivers from the PV ELite 2010 DVD. 3. Make sure the users have read/write permissions on the PV Elite 2010 'system' folder. This requires administrator login and permission changes/adjustments to the system folder.
_________________________
Scott MayeuxCADWorx & Analysis Solutions Intergraph Process, Power, & Marine
|
Top
|
|
|
|
#32674 - 01/19/10 05:32 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: Scott_Mayeux]
|
Member
Registered: 01/18/10
Posts: 8
Loc: india
|
Hi Scott Mayeux,
Thanks for your reply.
I done the above steps PVElite 2010 prompts out same error,but codecalc 2010 working fine. ERROR IS: PVElite Application has encountered a problem and needs to close.we are sorry for the inconvenience. Please suggest me solve this error.
Best Regards JL
|
Top
|
|
|
|
#32690 - 01/19/10 06:02 PM
Re: PVElite 2010 INSTALLATION ERROR
[Re: vikaash]
|
Member
Registered: 12/15/99
Posts: 600
Loc: Houston, Tx, USA
|
Some entries in the registry may be getting corrupted. It is actually this setting in the registry, If you delete this setting then, PV Elite should start fine,
HKEY_CURRENT_USER\Software\COADE, Inc.\PVElite\2009\PVElite\CommandBars-Controls
You have to CAREFULLY use Regedit to do that. Or you can delete the higher level key as shown in the attached document for the version of PV Elite that you are using.
If this does not work then make sure that PV Elite system folder has read and write access. On Windows XP it is,
C:\Documents and Settings\All Users\Documents\COADE, Inc\PVELITE
Let us know how this works.
Attachments
989-RestoreTabls.pdf (1083 downloads)
_________________________
Best Regards, Mandeep Singh CADWorx & Analysis Solutions Hexagon PPM
|
Top
|
|
|
|
#32774 - 01/25/10 11:04 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: Mandeep Singh]
|
Member
Registered: 01/18/10
Posts: 8
Loc: india
|
Dear Mandeep,
Thanks for your reply,I did the above steps now PVElite 2010 working fine.
Regards JL
|
Top
|
|
|
|
#32819 - 01/27/10 03:50 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: vikaash]
|
Member
Registered: 01/27/10
Posts: 2
Loc: Sharjah,UAE
|
Dear Mandeep,
Am also facing same problem. i follow the above steps but, that error is repeating.
Key : local
( ERROR: unable to access HASP SRM RUN TIME ENVIRONMENT(H0033))
How to solve the problem??
Regards, Bala.M
|
Top
|
|
|
|
#32823 - 01/27/10 07:50 AM
Re: PVElite 2010 INSTALLATION ERROR
[Re: Bala.M]
|
Member
Registered: 12/23/99
Posts: 347
Loc: Houston,TX,USA
|
Bala,
Place the 2010 PV Elite DVD into the drive and choose the option to install the ESL drivers.
After the drivers have been successfully installed, use the program pulse.exe to check the Maximum Version number (which is in the memory of the ESL). This number needs to be 1210. The pulse program is located under the PV Elite 2010 folder in a sub folder called ASSIDRV. If your maximum version is 1209 or less, your key will have to be updated and you will need to contact COADE.
I had this same problem at home with Windows 7 and the above steps solved the problem for me.
_________________________
Scott MayeuxCADWorx & Analysis Solutions Intergraph Process, Power, & Marine
|
Top
|
|
|
|
|
0 registered (),
34
Guests and
0
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
12065 Members
14 Forums
16973 Topics
75151 Posts
Max Online: 303 @ 01/28/20 11:58 PM
|
|
|