PD-5500 oblique nozzle ( Help required) - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » PV Elite » PD-5500 oblique nozzle ( Help required)

Topic Options

#32445 - 01/08/10 03:42 AM PD-5500 oblique nozzle ( Help required)
vibin Member Registered: 08/04/08 Posts: 41 Loc: india	We are doing a refurbishment project which designed as per PD-5500 1982 version in the past. As per PD-5500(2009) clause 3.5.4.2 d(2) The nozzle shall be of circular cross-section conforming to d)1)i) and the angle between the axis of the nozzle and a line normal to the shell surface shall not exceed 50°. which is not satisfied by the vessel. So is this clause was there in the older version of PD-5500(1982). Kindly help me.....
Top

#32468 - 01/08/10 02:22 PM Re: PD-5500 oblique nozzle ( Help required) [Re: vibin]
Ray_Delaforce Member Registered: 01/02/03 Posts: 743 Loc: Houston, TX	We do not have the 1982 version of PD 5500. Can anyone out there help vibin? _________________________ Sincerely, Ray Delaforce CADWorx & Analysis Solutions Hexagon PPM
Top