ISO 14692 Pressure Stress Multiplier for tees - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » ISO 14692 Pressure Stress Multiplier for tees

Topic Options

#31687 - 11/30/09 02:37 AM ISO 14692 Pressure Stress Multiplier for tees
Strss Member Registered: 10/15/09 Posts: 5 Loc:	Hello, Ive searched the forum and cant find anything on pressure stress multiplier, please let me know if there were any. Im running on CAESAR II version 5.2 and currently im using ISO14692 code. How do i manually change the pressure stress multiplier on tee? Thanks
Top

#31695 - 11/30/09 08:55 AM Re: ISO 14692 Pressure Stress Multiplier for tees [Re: Strss]
xlu Member Registered: 07/10/07 Posts: 26 Loc: TX. USA	In the current version (CAESAR II v5.20), the Pressure Stress Multiplier is calculated using the equation (D.17) of ISO 14692-3:2002(E), and it can not be changed manually. _________________________ Xiaojun Lu Intergraph CAS
Top

#31716 - 11/30/09 06:50 PM Re: ISO 14692 Pressure Stress Multiplier for tees [Re: xlu]
Strss Member Registered: 10/15/09 Posts: 5 Loc:	In paragraph 1 section D.2.3.4, IF Equation(7) is used to the determined the qualified service stress for tees then the pressure stress multiplier shall be set to 1. Where is the option for this equation (7)?
Top

#31733 - 12/01/09 08:58 AM Re: ISO 14692 Pressure Stress Multiplier for tees [Re: Strss]
xlu Member Registered: 07/10/07 Posts: 26 Loc: TX. USA	You are right. We should address this issue in next release. _________________________ Xiaojun Lu Intergraph CAS
Top

View All Topics

Moderator: Denny_Thomas, uribejl

0 registered (), 42 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

May
Su	M	Tu	W	Th	F	Sa
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)