For the attached Sketch of Vertical Vessel, having lifting lugs as per provided sketch. In the PV ELITE-COADE CALC-For the lifting lugs, in the vertical lift which forces to be added (Axial, Normal or tangential), for the Horizontal lift which forces to be added ?

In the horizontal lift, you would probably have normal force and axial force, depending upon if you have single point lift or multiple point lift.

For a vertical lift you will axial force, if you have 2 point lift (both lugs are lifted straight up).

I hope that helps.

IN THE HORIZONTAL LIFT HAVING SAME TWO LIFTING LUGS ONLY AS PER ATTACHED SKETCH, THEN WHICH FORCES ARE APPLICABLE?

Horizontal lifting; Normal Force
Verticl Lifting; Axial force