Topic Options
#31349 - 11/13/09 02:57 PM Trouble in orientation of the nozzles
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Dear Sir,

I have three queries regarding nozzles for Horizontal Pressure Vessels.

Please refer the attachment, which is a PVElite 2008 file. I would like to know.

1. For Nozzle UG mentioned in the attachment, the axis of the nozzle should be perpendicular to the axis of the vessel. Even though this looks correct in the model, when we export to Autocad, this nozzle is not shown properly. Could you please check whether the parameters mentioned in the Nozzle UG is correct or not.

2. For Manhole, MH, we would like to use a flange and cover fabricated from Plate having thickness of 12mm. IS there any provision in PVElite to use Flanges and covers fabricated from Plate material. We would not like to use ASME B16.5 Flanges, since they would be heavy, adding extra load to the vessel.

3. My major doubt is in regards to the orientation of nozzle L5. As per the requirement, the axis of nozzle L5 should be parrallel to the base plate / ground. I hope I have explained the orientation correctly. The nozzle L5 is basically for a level gauge. The flange of the level gauge should match with this flange. But this is not coming properly in the model. What could be the reason.


Please help.


Regards,
Abhilash Kurian


Attachments
892-31633.PVI (528 downloads)


Top
#31375 - 11/16/09 04:19 AM Re: Trouble in orientation of the nozzles [Re: Abhilash]
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Dear All,

Please someone provide me with a solution for query no.3.

Regards,
Abhilash Kurian

Top
#31452 - 11/18/09 05:47 AM Re: Trouble in orientation of the nozzles [Re: Abhilash]
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Dear All,

I am not able to understand why no one seems to answer my query. Is it because it is not possible in PV ELITE.

Regards,
Abhilash Kurian

Top
#31458 - 11/18/09 08:56 AM Re: Trouble in orientation of the nozzles [Re: Abhilash]
Mandeep Singh Offline

Member

Registered: 12/15/99
Posts: 600
Loc: Houston, Tx, USA
Dear Abhilash,

I cannot download your file, the link seems to be broken, can you re-upload the file or send it to COADE tech support.
_________________________
Best Regards,
Mandeep Singh
CADWorx & Analysis Solutions
Hexagon PPM

Top
#31502 - 11/19/09 03:37 AM Re: Trouble in orientation of the nozzles [Re: Mandeep Singh]
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Hi Mandeep,

There is some problem with attaching the file . Can I have any email address to which the attachment has to be sent.

Regards,
Abhilash Kurian


Edited by Abhilash (11/19/09 03:41 AM)

Top
#31503 - 11/19/09 04:32 AM Re: Trouble in orientation of the nozzles [Re: Abhilash]
Kinge Offline
Member

Registered: 03/03/09
Posts: 43
Loc: Netherlands
Answer on you question number 2.

You can calculate with appendix 2 a Blind Flange in Pvelite. I dont know if you have CodeCalc its customer-friendly to use then Pvelite to calculate a blind flange or other flanges.

Top
#31510 - 11/19/09 09:09 AM Re: Trouble in orientation of the nozzles [Re: Kinge]
Ray_Delaforce Offline
Member

Registered: 01/02/03
Posts: 743
Loc: Houston, TX
Hello Abhilash

Just send your file to techsupport@coade.com and mark it for the attention of Ray or Mandeep. Please also repeat your question in the email.
_________________________
Sincerely,
Ray Delaforce
CADWorx & Analysis Solutions
Hexagon PPM

Top
#31561 - 11/21/09 01:48 AM Re: Trouble in orientation of the nozzles [Re: Ray_Delaforce]
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Hi Ray,

It worked. Thanks a lot for the support. You guys rock.

Regards,
Abhilash Kurian

Top
#31562 - 11/21/09 01:49 AM Re: Trouble in orientation of the nozzles [Re: Kinge]
Abhilash Offline
Member

Registered: 11/13/09
Posts: 6
Loc: UAE
Hi Kinge,

I have Codecalc. Shall check the design of the blind flange and let you know.
Thanks

Regards,
Abhilash Kurian

Top



Who's Online
0 registered (), 124 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
May
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Forum Stats
12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM
Top Posters (30 Days)