Shell Thickness =18 mm with 10 mm CA
Wear Plate Width =300 mm.
Wear Plate Thickness =16 mm.
Please refer follwing note and calculation from PVelite output.
As per Note thickness (TEM9) should be only shell thickness.But it will take 24 mm( (18-10)+16). Also the width of wear plate is taken.
Please Clearify why it is happening.
[color:#3333FF]Note: Wear Plate thk. could Not be considered in this formula because:
Saddle-Tangent Distance A (70.00 ) is > R/2 (50.50 cm )
Wear Pad Extension (26.180 ) is less than R/10 (101.000 mm )
Circumferential Compression at Bottom of Shell:
= (Q*( K.9/( TEM9 * WPDWTH ) ) )
= ( 31365 *( 0.6366 /( 24.0000 * 300.000 ) ) )
= -277.33 kgf/cm²[/color]
Regards,
Satish Yadav