SIF for a cross - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » SIF for a cross

Topic Options

#2673 - 03/31/05 01:08 AM SIF for a cross
Mike Stanger Member Registered: 07/03/01 Posts: 22 Loc: Brisbane Australia	Does anyone know where I can find the SIF for a cross or how I can calculate it? _________________________ Mike
Top

#2674 - 03/31/05 07:17 AM Re: SIF for a cross
Patrick LaPointe Member Registered: 11/24/00 Posts: 16 Loc: Fredericton, New Brunswick, Ca...	Mike, A cross is not a B31.1 fitting so you won't find published SIF's for crosses. Regards Patrick LaPointe
Top

#2675 - 03/31/05 08:29 AM Re: SIF for a cross
John C. Luf Member Registered: 03/25/02 Posts: 1110 Loc: U.S.A.	Do a search on this forum you will find a lot of information regarding the term SIF _________________________ Best Regards, John C. Luf
Top

#2676 - 04/04/05 03:09 AM Re: SIF for a cross
Veit Bockemühl Member Registered: 04/26/00 Posts: 35 Loc: Hamburg, Germany	Dear Mike, It strongly depends on the D/d ratio whether one side of the cross will affect the opposite side. We are using FE/Pipe to analyse these geometries. Based on my experience, the D/d must be close to one to find an interaction between the two sides of the cross. You could send me geometry data and we will have a look at it. All the best, Veit Bockemühl vb@esn-gmbh.com www.esn-gmbh.com www.pipestressanalysis.com _________________________ www.esn-gmbh.com www.surgeanalysis.com
Top

View All Topics

Moderator: Denny_Thomas, uribejl

0 registered (), 35 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

May
Su	M	Tu	W	Th	F	Sa
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)