Dear Richard Ay

Thanks for the reply to my post: "Problems with the transfer of some attributes between PDS and CAESAR". I installed the last version of CAESAR and the last build. The interface works better, but I still have one doubt:

I want to transfer the material codes. I have the PDS material codes in the neutral file and the material mapping file in the C:\CAESAR\SYSTEM Subdirectory, but when I run the interface this error window appear:

"Error, improper version of the material mapping file detected. No materials will be transfered"

The first line of the material mapping file is "4.00". I change this to 4.50 and the error prompt above disappear, but when I click OK in the Intergraph / CAESAR II Neutral File Transfer window, a new error prompt appear with this information at the first line:

"forrtl:severe(64):input conversion error, unit 53, file C:\CAESAR\SYSTEM\PDS_MAT.MAP"

I don't know if that is an instalation error

Any response would be appreciated, Thank you

The material mapping file has changed, the index number is now first, followed by the name. E-mail me and I'll send you a revised file.