Hello
I am a beginner to CAESAR.

I'm getting the following error :
------------
ERROR 85 the NODE NUMBER 0 must be less than 32000 and greater than 0
-------------
I have rechecked my data file and I am positive that there is no node number 0.
What could be the problem?


The problem I think is in a T in the piping.
I am connecting from say node 100 to a T (called node 110).
one branch from the T goes to node 120, so I connect node 110 to 120.{ SO far no errror)
The other branch from the T goes to say, node 300. When I now connect 110 to 300 and run the program I am getting the error. (Now there are 2 nodes connected to 110 viz. 120 and 300)

Is this manner of numbering the T okay or is there a mistake ?


Please help
TIA

Probably not. Typically the "node 0" comes from skipping the specification of a restraint, displacment, hanger, or force node. The easiest way to find this is to use the LIST processor and check the auxiliary data.

Richard
Many thanks for the solution