Topic Options
#15 - 01/11/00 06:28 AM Convert a Input from Auto Pipe to Caesar
Ohliger Offline
Member

Registered: 12/16/99
Posts: 246
Loc: Mannheim,Germany
Who can give me a way description to convert a Input File from Auto Pipe to Caesar Input File.
Auto Pipe can Input Files save as :

Auto Pipe Database (*.dat)
Auto Pipe Batch (*.ntl)
Auto PLANT (*.pxf)
Auto CAD (*.dxf)
Auto Pipe 5.0 Model (*.dat)

Top
#16 - 01/11/00 09:04 AM Re: Convert a Input from Auto Pipe to Caesar
Richard Ay Offline
Member

Registered: 12/13/99
Posts: 5995
Loc: Houston, Texas, USA
As far as I know, there is no way to go directly from Autopipe into CAESAR II. However, if you also have Autoplant, and you can get your Autopipe model into it, then you can save the Autoplant model as a <font color="0000ff">".PCF"</font> file.

Version 4.10 of CAESAR II has an interface that can read in a <font color="0000ff">".PCF"</font> file.


------------------
Regards,
Richard Ay (COADE, Inc.)
_________________________
Regards,
Richard Ay
Hexagon PPM (CAS)
[img] [/img]

Top
#17 - 03/28/00 07:04 AM Re: Convert a Input from Auto Pipe to Caesar
Navendu Shrivastava Offline
Member

Registered: 02/07/00
Posts: 2
Loc: Navi Mumbai, MAH, India
I've tried *.pcf but it gives nominal dia not the actual OD of pipe. How to convert the same in actual OD.

Navendu Shrivastava
KLG SYSTEL LTD.
India

Top
#18 - 03/28/00 09:49 AM Re: Convert a Input from Auto Pipe to Caesar
Scott Nickel Offline
Member

Registered: 03/28/00
Posts: 2
Loc: Houston, Texas
I will look at this ASAP as soon as you send me your particular .pcf file.


------------------
Scott Nickel
COADE, Inc.
_________________________
Scott Nickel
COADE, Inc.

Top
#19 - 04/03/00 01:36 PM Re: Convert a Input from Auto Pipe to Caesar
Scott Nickel Offline
Member

Registered: 03/28/00
Posts: 2
Loc: Houston, Texas
Quote:
Originally posted by Navendu Shrivastava:
I've tried *.pcf but it gives nominal dia not the actual OD of pipe. How to convert the same in actual OD.

Navendu Shrivastava
KLG SYSTEL LTD.
India


The PCF interface did not properly address the "nominal - actual" diameter relationship unless the nominals were in inches. This has been corrected and a revised interface DLL is available. For this to work properly, ensure you select the right "pipe size" specification via the configuration module.



------------------
Scott Nickel
COADE, Inc.
_________________________
Scott Nickel
COADE, Inc.

Top



Moderator:  Dave Diehl, Richard Ay 
Who's Online
0 registered (), 18 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
December
Su M Tu W Th F Sa
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
Forum Stats
11721 Members
14 Forums
16098 Topics
72171 Posts

Max Online: 239 @ 12/09/19 03:04 PM
Top Posters (30 Days)
Michael_Fletcher 18
Vanman 12
vermaccio 12
treysoucie 10
Chill-N 9