Hi all,

Just I've installed 2008 software. I run a vessel made with 2007 and I must add a new nozzle on the head. When I tried to choose the material, the texts on the material table flip one second and after that disapear. No text.
I tried after that with a new vessel. When I tried to choose a material for shell, the same problem. With PD 5500 materials the same but with ASME material all is ok.
Any advices?

Hi Adrian,

We have the same problem than you, but nobody seems to have a solution. Have you fixed it already? If so, please, tell us.

Best ragards,

Ignacio

We have seen this issue in the 2008 January version. We have addressed it, but it has not been released as a public fix. Send us an email at support _at_ coade.com we will provide you with a hot-fix.

In due time we will have a build available for users to download and apply. I would recommend signing up to our mailing list to receive notification of the update. Use this link,

www.coade.com/updates.htm

Hi all,

Ignacio, for the moment I work with 2007.
Mandeep, thank you for your advices. I wrote a mail to support@coade.com and I sign again to your mailing list.

Regards,

Adrian Musat

All,

The underlying issue is that the column widths are being set to zero after the dialog has been initialized. Once the dialog is up move your cursor and manually resize the columns until you can see everything. Once you go through this process once, the program will rememeber the settings and all should be OK on subsequent access.

This will need to be done for any dialogs that encounter this problem.

Hi All,

My problem was solved. Mandeep sent to me one .zip folder and some instructions.

Regards,

Adrian