HI
THERE IS ONE LITTLE CONFUSION IN USING WRC107 IN CAESAR
CAN WE USE WRC107 FOR SPHERICAL VESSEL?
IF YES THAN WHAT SHOULD BE THE VESSEL COSINE VECTOR,NOZZLE COSINE VECTOR
CAN WE CHANGE DIAMETER OF VESSEL OR SELECT SPHERICAL VESSEL OPTION
THANKS IN ADVANCE
REGARDS
BHAVESH.SHUKLA

Bhavesh

refer caesar guidline for the same.

Bhavesh,
my share

CAN WE USE WRC107 FOR SPHERICAL VESSEL?
Answer- YES

IF YES THAN WHAT SHOULD BE THE VESSEL COSINE VECTOR,NOZZLE COSINE VECTOR

Answer- Depends on nozzle location, lets take example of Vertical vessle with horizontal nozzle(projection towards -x direction).

vessel cosine: 0,-1,0
Nozzle cosine: 1,0,0

CAN WE CHANGE DIAMETER OF VESSEL OR SELECT SPHERICAL VESSEL OPTION
Answer: diameter can be changed however D/d ratio should be in criteria.

hi naren

thanks for ur reply

but if my nozzle on dish head on vertical vessel than???

nozzle vector should be towards vessel centerline from the nozzle-vessle connection point.

---------
Naren