How to determine the unique key for each of the dongle since all the Coaded dongles in our company are using the same number.

Use the option to "Show ESL Data". Each report will include the unique serial number of the ESL.

Hi Richard,

Thanks for the advise.
However, I was install network version in my computer and I get this information while I click on the "Show ESL Data".


ESL Type: CAESAR II - Local HL

Client Name: TECHNIP GEOPRODUCTION SDN BHD.

Client ID: 16876 ESL Code Version: BD
Copy Number: 1 ESL Memory Code: Ok
ESL Generation Date: 6/8/2004 Remote Update Mask: 2295
First Access Date: --
Last Access Date: 4/18/2007
ESL Date Limited: No
ESL Run Limited: No Maximum Version: 1205
Dealer ESL: No
Evaluation Copy: No
Special Calc Bit: No
Payment Bit: No
Unlimited Keydisk: No
Phone/Fax Access: No
ESL Serial Number: 663859821
Module Access Flags: 2048

CAESARII





Network ESL Bit: No
CAESAR II
CAESAR II - CATIA
PV Elite
CODECALC
CADWorx/PLANTA
CADWorx/P&&IDA
CADWorx/EXT
CADWorx/LOOPS
CADWorx/ISOGEN
CADWorx/STEEL
CADWorx/EQUIPB
CADWorx/IP
CADWorx/PLANTB
CADWorx/P&&IDB
TANK



****************************************************************
File created on : 4/18/2007 at 11:18:30

COADE, Inc. techsupport@coade.com
****************************************************************



Is there something wrong with our installation?

No, this is a problem with the "info display routine". What "build" are you running?

Hi Richard,

I just updated the patches and now we are using Build 070122. How can I solve the problem with the "info display routine"?

You can't. This is a bug. You'll have to wait for the next build or Version 5.10.

So is there any way that I can get the unique key? I have to retrieve the key because we are going to list down the unique key for each dongle into our anual maintenace fees quotation because our management wish to know the license that hold in each dongle. Please help.

Stupid question, can Caesar interface with Catia V5?

Yang,

The ESL Serial Number shown above is unique for each ESL. If, using Windows Explorer, you navigate to \caesar\assidrv, you'll find and EXE there named PULSE. Double click this and select the option to "Show the ESL Data".


Vanman,

You should have started another thread for this question. CAESAR II can not interface directly with Catia. However, if Catia can generate a PCF file, CAESAR II can read that in and give you your model geometry.

Hi Richard,

I've tried but still getting the same thing.

I'll contact you via e-mail, I'm not sure I understand your problem.

Thank you so much Richard... Problem has been solved.