Posted by: freschif
PVElite2015 - JIS materials - 03/20/15 04:18 AM
Dear all,
in last PVE2015 Japanese materials have been included, but we faced the following problem with G3101 SS400.
When using G3101 SS400 as a plate e.g. for saddles design under “perform saddles check” the selected material gives:
1) allowable = 100MPa for all temperatures (seems not reasonable)
2) Min tensile strength = 400 MPa
3) Min Yield strength = 205 MPa (seems not correct)
But in the saddles dialog the yield and allowable are:
1) allowable = 99.9 MPa (seems not reasonable)
2) Yield strength = 245.46 MPa
In the calculation report the allowables used are:
1) Allowable (tension) stress = 0.6*Yield = 147.28 MPa
2) Allowable (bending) stress = 2/3*Yield = 163.64 MPa
In addition, G3101 SS400 seems not to be in the material database under “edit/add materials”
Is this a bug?
Thank you
Federico Freschi
in last PVE2015 Japanese materials have been included, but we faced the following problem with G3101 SS400.
When using G3101 SS400 as a plate e.g. for saddles design under “perform saddles check” the selected material gives:
1) allowable = 100MPa for all temperatures (seems not reasonable)
2) Min tensile strength = 400 MPa
3) Min Yield strength = 205 MPa (seems not correct)
But in the saddles dialog the yield and allowable are:
1) allowable = 99.9 MPa (seems not reasonable)
2) Yield strength = 245.46 MPa
In the calculation report the allowables used are:
1) Allowable (tension) stress = 0.6*Yield = 147.28 MPa
2) Allowable (bending) stress = 2/3*Yield = 163.64 MPa
In addition, G3101 SS400 seems not to be in the material database under “edit/add materials”
Is this a bug?
Thank you
Federico Freschi