Error running analyze

Posted by: tuky

Error running analyze - 07/20/12 03:37 AM

Dear,
When I use option ( Use Metric ASME Materials Databases)and I run analyze I get error describe in image.
Can anyone help me whit this problem?

Posted by: KunalShah

Re: Error running analyze - 08/01/12 05:11 AM

Can you attach the model file?

Posted by: MKN

Re: Error running analyze - 08/13/12 04:02 AM

IS THIS PROBLEM RESOLVED.
I'm also facing the same ERROR.if someone know the solution, Please let me know...

Posted by: tuky

Re: Error running analyze - 08/28/12 12:46 AM

sorry for the waiting, here is the model file. I didnt solved the problem.

Posted by: KunalShah

Re: Error running analyze - 08/28/12 10:58 PM

Hi,
It seems that the error is with external pressure temperature. External pressure chart HA-3 starts from temperature of 40°, and PVElite might be interpolating values from 40°C onwards (refer tabular values for Fig HA-3). May be moderators can explain further...

In short, for this case, you can enter some value for external design temperature and the value should be more than 40°C e.g. 41°C. I tried this...it works....

Posted by: tuky

Re: Error running analyze - 08/29/12 05:18 AM

Thanks!

Regards.

Posted by: Ray_Delaforce

Re: Error running analyze - 08/31/12 10:33 AM

Hello Guys

This problem has been fixed. If you have the R1 version of the 2012 PV Elite, you can download a hot fix on our eCustomer site. If you have not acceseed the eCustomer site before, you can find it as follows:

If you are a domestic (America based) customer of CAESAR II, PV Elite, or TANK, please go to https://crmweb.intergraph.com and log your SR (or request a login if you don’t have one yet).

If you are an international customer or a CADWorx customer, please go to http://www.coade.com/Support/Dealers.shtml to find out who to contact for support.