Posted by: Ken
Grayloc library - 01/23/18 04:48 PM
Hi,
Have a client that's requested Grayloc piping that needs to be revised on CADWorx2012 setup and cant see a generic specs in CADWorx2012.
Any ideas where to find these kind of piping specs or is it called something else in CADWorx2012.
Ken
Posted by: Vanman
Re: Grayloc library - 01/23/18 11:19 PM
I dont believe this was ever available with CADWorx 2012. There was an older imperial Victaulic spec if I remember correctly.
If you are wanting to do clamped piping, I would recommend taking a look at 2017 or 2018. These versions have some updated component architecture and features to support these systems.
Posted by: dgorsman
Re: Grayloc library - 01/24/18 09:13 AM
Greylock requires some special treatment. As mentioned there is Victaulic content available directly from that vendor, but nothing Graylock.
Posted by: Ken
Re: Grayloc library - 01/29/18 10:54 AM
Thanks for your input.
I ended up customizing a STUB END Flange file as well new Gasket/bolting files in CADWorx2012 c/w a AutoCAD 3D clamp solid to be inserted as an graphic representation.
Ken