Posted by: Nisar_Dingankar
Vertical Boot in Horizontal Vessel - 01/19/22 05:07 AM
Good Day,
How to insert a vertical Boot with Reinforcement pad and Nozzle in a Horizontal Vessel as shown in the image.
Appreciate your help.
Posted by: Matt.Worland
Re: Vertical Boot in Horizontal Vessel - 01/19/22 05:05 PM
It's been a while since I've tried to do that, but I believe I was able to add the boot as a nozzle, then if you have other connections on the boot, you can add nozzles to nozzles.
Posted by: Nisar_Dingankar
Re: Vertical Boot in Horizontal Vessel - 01/26/22 02:30 AM
Thanks for the reply.
Can we connect dishend to the end of the pipe.
Posted by: Matt.Worland
Re: Vertical Boot in Horizontal Vessel - 01/26/22 09:27 AM
You could... but typically, if you use pipe, then you would use piping components, and same the other way, if its a piece of equipment, then you should use the equipment parts.
If you need a dishend on the pipe, I would modify a cap component in the spec and call it a dishend or create a user shape.