Posted by: vijay4friends
need help to generate isometric - 01/19/11 08:13 PM
hello,
i need ur help to generate the isometric in cadworx.
the situation is i modeled a whole plant in cadworx and while try to generate the isometric i got a reply saying
"
Only components drawn with the ISOGEN interface active are allowed..."
"Command: _ISOGENOUT
Error reading isometric directory..."
"Command: _ISOGENOUT
Enter an option [Line number/Select components] <Select components>: S
Select objects: 2 found, 1 group
Select objects: 2 found (2 duplicate), 1 group, 2 total
Select objects: Specify opposite corner: 6 found, 3 groups, 8 total
Select objects: Specify opposite corner: 4 found (4 duplicate), 2 groups, 8
total
Select objects: Specify opposite corner: 4 found (2 duplicate), 2 groups, 10
total
Select objects:
Component not ISOGEN enabled [1]: REDUCER, CONC S/STD, ASTM A-234 GR WPB
Coordinates for component [1]: -52097.8921,73655.7477,1274.9663
Component not ISOGEN enabled [2]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [2]: -51881.9921,73655.7477,1274.9663
Component not ISOGEN enabled [3]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [3]: -51881.9921,73503.3477,1274.9663
Component not ISOGEN enabled [4]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [4]: -51881.9921,73503.3477,1027.0000
Component not ISOGEN enabled [5]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [5]: -55230.3541,73655.7477,1274.9663
Could NOT process 5 component(s) due to permissions failure...
Only components drawn with the ISOGEN interface active are allowed...
No components were written to file..."
like this?
i need ur help to generate the isometric in cadworx.
the situation is i modeled a whole plant in cadworx and while try to generate the isometric i got a reply saying
"
Only components drawn with the ISOGEN interface active are allowed..."
"Command: _ISOGENOUT
Error reading isometric directory..."
"Command: _ISOGENOUT
Enter an option [Line number/Select components] <Select components>: S
Select objects: 2 found, 1 group
Select objects: 2 found (2 duplicate), 1 group, 2 total
Select objects: Specify opposite corner: 6 found, 3 groups, 8 total
Select objects: Specify opposite corner: 4 found (4 duplicate), 2 groups, 8
total
Select objects: Specify opposite corner: 4 found (2 duplicate), 2 groups, 10
total
Select objects:
Component not ISOGEN enabled [1]: REDUCER, CONC S/STD, ASTM A-234 GR WPB
Coordinates for component [1]: -52097.8921,73655.7477,1274.9663
Component not ISOGEN enabled [2]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [2]: -51881.9921,73655.7477,1274.9663
Component not ISOGEN enabled [3]: ELL, 90%D LR S/STD, ASTM A-234 GR WPB
Coordinates for component [3]: -51881.9921,73503.3477,1274.9663
Component not ISOGEN enabled [4]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [4]: -51881.9921,73503.3477,1027.0000
Component not ISOGEN enabled [5]: PIPE, S/STD SMLS, ASTM A-106 GR B
Coordinates for component [5]: -55230.3541,73655.7477,1274.9663
Could NOT process 5 component(s) due to permissions failure...
Only components drawn with the ISOGEN interface active are allowed...
No components were written to file..."
like this?