Posted by: Robert
Relief Valves sizes reversed on face of ISO - 12/16/19 10:40 AM
Not sure what version this might have changed or if there is a way to fix. Previous version (2015) I don't recall the PSV size in the BOM being reversed. On (2019) it is.
To maybe simplify when you go to component edit on a PSV it will have "inlet x outlet" However on the BOM generated from isogen it has the "outlet x inlet". Is there a way to fix this other than manually changing the face of the iso?
Posted by: PaoloDP
Re: Relief Valves sizes reversed on face of ISO - 12/20/19 02:33 AM
Unfortunately, problem is in base catalog specification where is larger x smaller and PCF file (which is input for ISOGEN) catch that order an post it on N.S. in material list. I don't see any Isogen switch to correct that. But usually clients don't complain about it.
However, there is one thing in I-configure which is called Display SmallxLarge NS, in Materials/Drawing Material List/Setting. There is some input table for that, but I don't know how to prepare it.
Posted by: Robert
Re: Relief Valves sizes reversed on face of ISO - 12/26/19 07:30 AM
Thanks. It worked by using the record identifier 90 & 93 in the text box for the relief valves. Now sizes come out on Iso BOM in same sequence as the component shows in the model.
Posted by: Hauser
Re: Relief Valves sizes reversed on face of ISO - 02/03/20 10:19 AM
Hi Robert,
Can you send a screen capture of the syntax for Relief valve settings. I am trying to find out how put the settings in I-Config but can't find any.
you mention "...text box for the relief valves"
we are getting the 2x1 (Outlet x Inlet) when it should be the other way around.
Please let me know what I need to do to accomplish this.
Thanks
Posted by: Robert
Re: Relief Valves sizes reversed on face of ISO - 02/24/20 03:30 PM
Since this ancient forum does not let you attach a screen shot and I don't have anywhere to put a url image hopefully this wording will be sufficient. I did not do myself but one of the tech guys here figured it out from the help above.
In I-configure go to Materials>Drawing Material List>Settings>Display SmallXLargeNS click on the arrow to expand text box type in following:
90
93
In our case those values fixed our issue if those do not work try:
75
76