Posted by: Chill-N
I-Configure Material List Setup: "Style 3" Would be Nice! - 12/03/19 05:35 AM
Having more study to do, I am undergoing quite an ordeal in achieving what was known as a "Style 3" type of materials list in our custom SPOOL drawing configuration (see item 2 below), I am not there just yet and request your assistance.
QUESTION: How are lined borders around each "cell" assigned using I-Configure?
1.) This includes but is not limited to the material list. Although the material list is most likely the only list we will use here.
2.) Initial setup using I-Configure and a custom 11x17 sheet size yields an undesirable TEXT ONLY LIST so far.
3.) We have owned CADWorx for several years now. I explored the ISOGEN setup configurations before the release of the I-Configure application and still have the printed documentation showing "Style 3" that is mentioned above.
QUESTION: How are lined borders around each "cell" assigned using I-Configure?
1.) This includes but is not limited to the material list. Although the material list is most likely the only list we will use here.
2.) Initial setup using I-Configure and a custom 11x17 sheet size yields an undesirable TEXT ONLY LIST so far.
3.) We have owned CADWorx for several years now. I explored the ISOGEN setup configurations before the release of the I-Configure application and still have the printed documentation showing "Style 3" that is mentioned above.