CADWorx 2019 iso continuation not showing from xref

i have attached a piping model as an xref and then ran a line from that xref on a new model. When i run my isobatch the continuation to the line on the xref is not showing. Continuations will show OK if both pipe-runs are in same model. This was not a problem on previous versions. Anyone come across this and have a solution.

What build are you using? I just tested this scenario with the latest 2019 and it works as advertised.

What do you mean by build? Running CADWorx 2019 SP1 on AutoCAD 2018?

Should also mention it is a Metric project.

Sorted it thanks, USEXREF OBJECTS from config file had been switched to NO by someone.

Build is usually referred to as the software version being used. BTW 2019 SP1 is a little out of date.

Glad you got it working.

Im having similar issues here but only when its xrefs that are more than 2 levels deep. meaning we have skid piping xrefed into a skid model, then the skid model xrefed into an overall model where we would drop isos from. its basically 2 levels deep. the continuations show up when we drop isos from the base piping skid model or the overall skid model that has the piping base model xrefed in, but the master that xrefs the overall skid model the continuations wont populate.

still having all sorts of cont problems, when we toggle cont graphics to 1, 2 or 3 we lose cont text in places.

any fix for this? or are we not able to drop isos from master models now days with multi level xrefs? this was never a problem back on older builds 2017 and prior

bump

@trey, which version are you using ?

2020 R1 and R2 (we have to use both right now since each one has something different broken)