I've been using the old method. Haven't heard an ETA yet on a fix.
The fix for GED / POD Processor was made available with SP1 for 2020 R2. I recall SP1 was released sometime in February this year.
There is still an issue with GED that needs resolved with 2020r2.
There is still an issue with GED that needs resolved with 2020r2.
I've spent 2 whole days to figure out how to populate autocad block attributes from xsl file. I am using cadworx2020r2 and I follow all the steps in the video and applied all the suggestions here but still not working. If I open 'dedug.log'file, it looks ok as below.
--------------------------------------------------------------
*** PODTools Version : 4.0.0.69 ***
*** Current user: ICDASIAPACIFIC\JoungS on Machine: WPC-312
*** GetExternalData command started at 29/04/2022 2:36:47 PM ***
*** Executing command from "C:\Project_IConfigure\ProjSTD_IConfigure\11198\Data\PODProcessorSettings.xml"
*** Processing POD: ""
Migrating GED script from Version 3.0 to Version 4.0
*** Diagnostic level: Normal
Processing initialisation file "C:\CADWorx 2020 R2\Plant\Isogen\I-Configure\Core Components\PODTools.xml"
Getting external data for pipeline with Name="50-PW-0050-G1"
>>> Processing PIPELINE commands:
EXECUTE tag(0) Pipeline: 50-PW-0050-G1
* Attributes(ATTRIBUTE101) set to "50"
* Attributes(ATTRIBUTE102) set to "PW"
* Attributes(ATTRIBUTE103) set to "0050"
* Attributes(ATTRIBUTE104) set to "G1"
* Attributes(ATTRIBUTE105) set to "XXXX"
* Attributes(ATTRIBUTE106) set to "XX"
* Attributes(ATTRIBUTE107) set to "10% RT"
* Attributes(ATTRIBUTE108) set to "10% MT"
* Attributes(ATTRIBUTE109) set to "WATER"
* Attributes(ATTRIBUTE110) set to "XXX Kpa(g)"
* Attributes(ATTRIBUTE111) set to "P-1002"
* Attributes(ATTRIBUTE112) set to "P-1015"
* Attributes(ATTRIBUTE113) set to "PIDX"
* Attributes(ATTRIBUTE114) set to "CLEAN"
* Attributes(ATTRIBUTE115) set to "X"
* Attributes(ATTRIBUTE116) set to "XX"
* Attributes(ATTRIBUTE117) set to "U/G POTABLE WATER LINE FROM THE EXISTING PW LINE"
*** GetExternalData command completed at 29/04/2022 2:36:48 PM ***
------------------------------------------------------------------------
But each time when IGO run, the cadworx freeze about 5 min. and generate isometric drawing but 0kb and can't open.
I follow everything but I don't know what I am missing? In cadworx2020, should I do a bit different way?
I will be much appreciated if someone find out what is wrong.
Thanks.
This sounds like you need to install SP1 for 2020 R2.