wrc doesn't work

Posted by: Alessiaccio

wrc doesn't work - 08/11/11 01:52 AM

Hi, I've C2_5.2_build 100715.
WRC 107/297 doesn't work fine infact, when I click to select vessel material, C2 desn't open material database list (mouse pointer becomes a clepsydra and you can't work anymore).
Is it possible to solve this problem, please?
Thanks.
Posted by: Loren Brown

Re: wrc doesn't work - 08/11/11 07:13 AM

Please do the following:

Click on the Windows Start button, select the Run command, and type:

Regsvr32 "C:\Program Files\COADE\CAESAR II 5.20\wrc107.dll"

Then repeat this command for the following two files: wrc297.dll and common.dll.
Posted by: Shahid Rafiq

Re: wrc doesn't work - 08/20/11 03:35 AM

I am working on C2 Version 5.30.0 Build 101122 and WRC 107 module is not running ANALYSIS.

What should I do to make it run the analysis?
Posted by: Richard Ay

Re: wrc doesn't work - 08/20/11 11:27 AM

90% of the time the reason the WRC module won't run is because the DLLs are not registered. Register the DLLs as instructed above. NOTE, you must have Administrator rights for this to work. If you continue to have issues, e-mail Tech Support directly.
Posted by: Mark Howard

Re: wrc doesn't work - 09/19/11 05:00 PM

There may be two separate issues. The WRC107 module seemed to be working just fine for me but I could not get anything on the analysis page. After finding this discussion I was trying to find someone with Admin rights. In the mean time a collegue showed me that we can get the analysis if we send it to a text file.