Isogen Crashes: CAESAR II 2011 Build 110228

I urgently need a help, whenever I try to save annotation in Isogen the whole program crashes.

Please send me your CAESAR II (".c 2") file, also tell me which data you checked for annotation. We will study this issue.

Regards,

Shawn Zhong
Shawn.Zhong@intergraph.com

Thanks Shawn, the file has been sent to your inbox.

I have the same problem and for me the problem was somehow solved when I changed back the Global coordinate to zero. However it is not a real solution, moreover the stress isometric layout is not correct (at bends). For the same file I didn't have any problem in 5.1.

Thank you for your help.

Regards,

and no error in 5.1

One thing that I discovered is that it is the "idfgen.dll" responsible for the 45 deg bends that replace the the 90 deg bends.

5.30 use the version 7.3.0.13 of this file.
5.20 use the version 7.0.0.16 of this file.

I think that it should be replaced with one that is functional.

Waiting for some help,

Regards,

CAESAR II 5.30 and 5.20 build 100715 use Personal Isogen 6.3.0, the earlier build of 5.20 uses Personal Isogen 6.0.0. "idfgen.dll" version 7.3.0.13 is with Personal Isogen 6.3.0, and "idfgen.dll" version 7.0.0.16 is with Personal Isogen 6.0.0. Users are not supposed to change that file, because those isogen dll files work as a group, swap individual file may disable other functions.

Regards,

Thank you Shawn.

In this case, is any newer Personal Isogen that is functional with Caesar? For the time being I can not use it as you can see.

Just as a comment, while it must be true that the files should not be mixed, at least the idfgen.dll from 5.1 seems until now to solve the 45 deg bends issue in 5.3.

What can be done?

Regards,

I'm glad to see that the above mentioned problems are solved now in the new SP3.

Regards,