Posted by: ejaniour
Allowable stress - 01/07/11 02:57 AM
Hi,
should we always tick the "allowable stress" box in piping input when making a stress pipe analysis ?
Posted by: MoverZ
Re: Allowable stress - 01/07/11 03:15 AM
Like many features on the input spreadsheet, the allowable stress is carried forward. You only need to tick or re-enter the value if it changes.
Posted by: ejaniour
Re: Allowable stress - 01/07/11 07:16 AM
Richard,
thank you for your help..!
i'm getting better & better now thanks to your advices !
just one more thing:
would you give me please some posts about wind & earthquake effects & how i introduce them in my modeling ?!
thnx in advance !
Posted by: Richard Ay
Re: Allowable stress - 01/07/11 10:02 PM
I really can't do that in a Forum, or even via e-mail, these subjects are rather involved. The input into c2 is easy, check the checkbox and fill in some values. As to where to get the values, what they mean, and the proper load case setup - that is when things get more complex.
What Standard are you trying to comply with?