Posted by: PKU
ISOGEN ISOMETRIC - 09/07/10 01:37 AM
Users, Are you experiencing the problem of not working ISOGEN ISOMETRIC after latest patch Build 100715?
It is not working in my machine.
Posted by: Shawn
Re: ISOGEN ISOMETRIC - 09/07/10 03:57 PM
We know this problem and are trying to fix it. What you can do now is to re-install the CAESAR version 5.20 and don’t copy “C2isogen.exe”, “Stressisoproject.dll” and “Pipinginput.dll” when upgrading to latest build.
Regards,
Shawn Zhong
Engineer/Developer
CADWorx & Analysis Solutions
Intergraph Process, Power, & Marine
Shawn.Zhong@intergraph.com
Posted by: PKU
Re: ISOGEN ISOMETRIC - 09/08/10 05:31 AM
I have followed your advise but it is not working and giving Microsoft error.
Posted by: Shawn
Re: ISOGEN ISOMETRIC - 09/08/10 04:19 PM
We are working on that, will have a fix soon.
Regards,
Shawn Zhong
Posted by: Giuseppe
Re: ISOGEN ISOMETRIC - 12/29/10 05:59 AM
I have the same problem, any solution now?
Thanks
Posted by: Shawn
Re: ISOGEN ISOMETRIC - 12/29/10 09:30 AM
The build 20100715 only works with new isogen version 6.30, you can download the following file, unzip it and extract all the files to CAESAR II installation folder. This will fix your problem.
www.coade.com/uploads/caesar/Personal Isogen 6 SP 3.zip
Regards,
Shawn Zhong
CADWorx & Analysis Solutions
Intergraph Process, Power, & Marine
Posted by: Shawn
Re: ISOGEN ISOMETRIC - 12/29/10 10:34 AM
Please notice that the underline for the previous link should cross the entire line. You need to type the entire string in order to download the file.
"www.coade.com/uploads/caesar/Personal Isogen 6 SP 3.zip"
Regards,
Shawn Zhong
CADWorx & Analysis Solutions
Intergraph Process, Power, & Marine
Shawn,
I'm having problems installing the latest build. After downloading the file, I'll double click to start the install and nothing will happen. No dialog boxes, warnings, little "hourglasses", etc. will appear.
Any idea what's going on?
Thanks.
Posted by: Richard Ay
Re: ISOGEN ISOMETRIC - 12/30/10 12:55 PM
The latest c2 build is a "self-extracting" ZIP archive. When you double-click it, a window should open up allowing you to specify where the files should be extracted to. If this doesn't happen I suspect the download is corrupt, all you can do is download the file again.
Posted by: MBlink
Re: ISOGEN ISOMETRIC - 01/10/11 01:58 AM
Hi,
I installed this version of isogen, but now I-configure seems to be broken.
When I start I-configure, I get the following message:
Error in I-configure form load (prepare project manager)
Error creating project manager
Error looking up version of sysconfig
Version of sysconfig does not match projectmanager
Sysconfig major.minor = 3.1
Projectmanager major.minor = 3.3
Terminating application
Then I get the main screen of I-configure and when I want to connect to a configuration, I get about the same error, but here I also get a runtime error numer: -2147199359 (80045681)
Posted by: Shawn
Re: ISOGEN ISOMETRIC - 01/10/11 02:55 PM
Hi,
You can find the "SysConfig.mdb" file in following folder,
C:\Program Files\Common Files\Alias\Data
This is a standard mdb file which you can open in MS-Access, I-Configure will read this file when it starts, and compared this ProjectManager.dll version with the one registered. Open it in Access, change the "Version" table to 3.3, that will fix the first error message.
I am not sure about the second runtime error, this may be due to failure to initialize the "projectmanager.dll". It may be fixed automatically after you fix the first one.
Reagrds,
Shawn Zhong
CADWorx & Analysis Solutions
Intergraph Process, Power, & Marine
Shawn.Zhong@intergraph.com,