Posted by: Engr_mech
Importing file from CADWorx to CAESAR - 08/18/10 03:31 AM
When I import file from CADWorx 2009 to CAESAR 5.10 by "system out" option in CADWorx plant .
It make file "project_CW.S$$" of 0Kb size , instead of making "project.C 2" file. and could not be opened in CAESAR.
What could be the remedy.??
Regards
Posted by: CADWorx Support
Re: Importing file from CADWorx to CAESAR - 08/18/10 08:18 AM
Can you send the following files to cadworx@intergraph.com so that we can look into the issue further?
-----
- For issues with CADWorx Plant to CAESAR II interface, email the AutoCAD model drawing (DWG) file and CAESAR II input file (*._A, *.C2). Also, run the CADWorx command GETALLSPECDATAFILES. This command will copy all specifications and data files used in the model into sub-directories under where the model drawing file is located. Zip the contents of these directories and email it to us. If the model consists of several line numbers, please indicate in the email which line number(s) you are having issues with.
-----
Posted by: Engr_mech
Re: Importing file from CADWorx to CAESAR - 08/18/10 09:07 AM
Well i have tried it on other system its working fine on other system. Whats the reason than!
Posted by: CADWorx Support
Re: Importing file from CADWorx to CAESAR - 08/19/10 12:07 PM
Can you check the following on both systems?
-----
---------- Software Version Information ----------
Step 1: For CADWorx Plant, CADWorx P&ID, or CADWorx Steel, run the command CADWORXABOUT. For CADWorx Equipment or PV Fabricator, run the command EQUIPABOUT. These commands will display a dialog with the required information.
Step 2: Click the "Close" button on this dialog to send the required information to the AutoCAD Command Line.
Step 3: Copy this information out of the AutoCAD Command Line and paste it in an email.