Posted by: Flames
Expansion Coefficient - 03/18/09 09:32 AM
I used user defined materials for stress analysis. An error came up as below:
99E Expansion Coefficients for user defined materilas must be set by the user.
I do not know where / how to input it.
Thanks,
Flames
Posted by: dentonous
Re: Expansion Coefficient - 02/04/11 10:43 AM
I am also having this problem. Would you mind explaining how you fixed it? Thanks
Posted by: Richard Ay
Re: Expansion Coefficient - 02/04/11 12:15 PM
Just put the expansion coefficient into the temperature field, instead of the temperature. Check the "help text" here, it explains what to do and what the expected "units" are.
Posted by: ales_ruzicka
Re: Expansion Coefficient - 02/28/11 06:58 AM
Check the "help text" here, it explains what to do and what the expected "units" are.
Where can I find "help text here" ?
Posted by: danb
Re: Expansion Coefficient - 02/28/11 07:58 AM
Ahoj,
1.Select the material 21 User Defined
2.Click inside the field then press F1 or ? to bring the help.
Regards,
Posted by: SJ
Re: Expansion Coefficient - 03/03/11 01:29 AM
Just click in the box you are interested & press F1.