Posted by: adi singh
Caesar 4.5 to Caesar 5.10 - 07/27/08 10:40 PM
Can we Open File of Caesar 4.5 ver in Caesar 5.10 ver.
How it affects the results.
Or
will we get the same result for both file ?
Posted by: anandh
Re: Caesar 4.5 to Caesar 5.10 - 07/28/08 01:17 AM
hi adi singh,
whenever u open the lower version drawing it automatically convert higher version. actually previously i used caesar 4.0 drawing. but now i am using only caesar 5.0. it can not affect my result.
Posted by: Richard Ay
Re: Caesar 4.5 to Caesar 5.10 - 07/28/08 06:55 AM
c2 Piping Input files are always "upward" compatible. Typically Piping Input files are NOT "downward" compatible.
Usually you will obtain the same results when running the same job file on different versions. There are several reasons why you could obtain different results:
1) The c2 Configuration File is different between the two data directories.
2) There has been a change to the applicable Piping Code, so the software is computationally different.
3) We corrected an error.