Jacketed lines

Hi to Everybody

Does anyone have the following article?

"How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'.

Thanks

Mino

Usually, it is a good idea to push the final stress analysis of jacketed piping down to the fabricator. The reason for this is that loads are transferred between the core (inner) pipe and the jacket pipe only at the internal spider locations, and the fabricator is the only one who knows where they are in time to produce a meaningful Code Compliance Report.

You will need to do some preliminary analysis to locate supports, etc., and then provide that information to the vendor either as a preliminary stress report or in drawing form. The weight of the inner pipe is supported by the spiders, and the spiders, in turn, are supported by the jacket pipe, which is in turn supported by the pipe supports in locations you provide.

Most projects don't wnat to extend the schedule so that the design engineer produces the final stress report. As you can see from the load path described above, much coordination and iteration is required to get the final analysis to comply with the Code rules. This would unnecessarily delay both the project and the fabricator.

Hi CraigB

Thank you for the answer...
I'd like modelling the jacketed pipe in a good manner, so i asked myself what is the best method...

Mino

Check out the Caesar II application guide... page 6-5. It discusses jacketed piping and gives an example.

SOME BODY KNOWS STRENTH CALCULATION OF JACKETED PIPE?

Oi, bhavesh k shukla .... don't shout !

What exactly is your question anyway ?

I have it.
Give me your email.

Hi Ladi Louis,

Thank you very much, my e-mail is predator1973@libero.it
Thanks a lot...

Mino

Hi Ladi Louis,

Could you also send me a copy

Thanks a lot...

Deepthi

Hi Lady Louis,

I have checked online but couldnt find a copy.

could you share me a copy to dduddempudi@onquest-inc.com

Thanks,
Deepthi

please send me a copy too

Hi Ladi Louis,

Could you also send me a copy

Thanks a lot...



MK

Hi Ladi Louis,

Could you also send me a copy

Thanks a lot...

my mail id is 2manoj@indiatimes.com

Please can any of you mail it to me on varun21rocks@gmail.com

I need that paper too. Please if you can email me at engr.zia@gmail.com

Hello Ladi Louis,

Could you also send me a copy please? Thank you.

Waranat

inwaranat@yahoo.com

hi

Mr. varun

I think you should refer CAESAR-II application guide.
That contains all you require.

bye

Hey,

Can you please send me the copy too.

My mail id is jenieverlasting@gmail.com.

please send me a copy too

juan.quiroz@pyaing.cl

thank's

Hello Everbody,

If any one of you can send me a copy of the above paper at my e-mail adddress Saneh.Gupta@Akersolutions.com ,I will be thanful to you.

Cheers

please send me a copy too

khatkole@yahoo.co.in

thank's

Hi Ladi Louis,
Could you send me too these copy, please....
dylan78born@yahoo.com

Best Regards

Tengku Syahdilan

Hi Ladi Louis,
Can you please send me these copy.
habibur_21@yahoo.co.in

Regards
Habib

Dear Ladi,

Please send me also. Thank you very much.

Samsulpm@yahoo.com

Hello,!!!

If any one can send me a copy of the Application Guide to my e-mail address wromero@ditechsa.com,I will be thanful to you.

Why do you need someone to send you this, it is installed with the software. From the Main Menu, pull down the "Help Menu", then select "On-Line Documentation".

Hi Ladi Louis,

Could you also send me a copy

Thank you very much.
mahdee.nr@gmail.com

Hi Ladi Louis,

Could you send me a copy gpskumar22@yahoo.co.in

Regards
senthil

can you please send me a copy also to my email id. shravana_ks@rediffmail.com

Me too ladi louis at jakobians@gmail.com


seize the day

Aaaah.......... I have found that people of the city are merciless.

I tried to google the paper to purchase it but could'nt have a trace.

I also need the paper.Can somebody send it to me at my e-mail address Saneh.Gupta@Akersolutions.com or attach here in the discussion forum?.

Regards
Saneh

Dear Ladi Lois Sir,

Would you also send a copy of that jacketed pipeline to me.

Thanx in advance

can any on send the copy "How to stress analyze jacketed piping" to me for information? crlxh@zj.com

would you please send it to me too. mdreza2001@yahoo.com

Best regards,

Please any one send me artical "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'. to the following mail id smarmech@gmail.com

thanks.

ram

any one can help me this paper ?

Ladi Lois - Please send article to following address:

ernststavros@yahoo.com

can you please send me a copy also to my email id. lingamurthy_e@yhoo.com

Hi all,

you can look at this file. maybe I took it here or somelink in the internet. It will be best to surf the internet because you will find many things along the way.

Regards!

very thanks, but I still can't get the "How to stress analyze jacketed piping"

Hi all,

Can anyone please send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'. to the following mail address:

ypchin@dialogasia.com

Many thanks.

Chin YP

Hi Ladi Louis,

Could you also send me a copy please, as I can't find it over net.
My mailid is mailsatan@gmail.com

Thanks a lot...


Kind Regards

Satzou

Can anyone send me a copy of the artical "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'.

My email is: wshuo2001@gmail.com

Thanks a lot!

Dear Ladi Louis,

Please send me that article to rois_s@yahoo.com

Thanks you very much,
Rois

Can anyone send me a copy of the artical "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'.

My email is: cix1977@libero.it

Thanks in advance

I would like to have it too, my e-mail: caligola2000@email.it

Why don't you put it on share on some of the many free sharing services like the one from which I downloaded the spielvogel book, here it is:
http://www.4shared.com/....

Hi Ladi Louis,

Can you please send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'. to the following mail address:

gajendra.patil@jacobs.com

Thank you very much.

Regards,
GSP

Hi all,

Can anyone please send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'. to the following mail address:

isidorocorreia@technoedif.pt

Thanks in advance,

Regards,
IFPC

Hi Ladi Louis,

Could you also send me a copy

Thanks a lot...

karmakar.tp@gmail.com

Dear lady louis please send me the copy to dylan78born.yahoo.com. I will appreciate ur kindness.

Hi

Can you send me the copy. Mail id tsv_p_rao@yahoo.com

Thank you

Rao

Hello,

Can anyone send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'?

e-mail: jean.miura@yvsite.com

Thnaks in advance

Hello,

Can anyone send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'?

e-mail: ag-ser.ing@libero.it

Thnaks in advance

Hi Mino
I happened to also need same article ("How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978') and it seems you may received it from Ladi (do not have his email). If you did receive it, I would appreciate a copy too for an urgent current project.

Thanks in Advance.
Isseck

Mr Ladi Louis / Any one else

May I request a copy to my mail : avgpaul@gmail.com

Venugopal

Hi,Ladi Louis.
I help a friend to find the article,"Improve steam cracker operation",it is from Hydrocarbon Processing,1978，volume 57,issue 9, page:227-236
Would you please help me to search it and send a copy of it to my E-mail, srising@126.com.
thank you very much.
sunrising.

Can you please send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , Febtuary 1978'. to the following mail address:

rinasmundakkal@gmail.com

Hello everyone!

Could anyone please send me a copy of the article "How to stress analyze jacketed piping" from "'Hydrocarbon Processing' Journal , February 1978'. to the following mail address:

raporlares@yahoo.com

Thank you...^^