Posted by: IvanAbril
Isogen Ceaser 5.10 problem - 12/06/07 07:44 AM
Hi friends,
We just to update Ceaser 5.10, when we try to create a isometric drawing, the program gives the following error:
Proyect Manager creation failed
Also we started the Diagnostic CRC Check and the following error was got:
Mistack C:\ARCHIVOS DE PROGRMA\COADE\CEASAR II 5.10\OUTPUT2.XE
Posted by: Shawn
Re: Isogen Ceaser 5.10 problem - 12/06/07 09:52 AM
Hi Ivan,
Those two errors are not related. You need to register "ProjectManager.dll" in your CAESAR 5.10 directory. You might need to register "pisogen.dll" too.
Regards,
Shawn
Posted by: Richard Ay
Re: Isogen Ceaser 5.10 problem - 12/06/07 09:54 AM
... and if you use the [Search] option on the right (just above the calendar) to search for previous ISOGEN discussions you'll find a lot of information.
Posted by: IvanAbril
Re: Isogen Ceaser 5.10 problem - 12/06/07 02:04 PM
Hi Shawn,
I have found those files inside the directory, but I dont know how to register it, so I added
REGSVR32 /s ProjectManager.dll
REGSVR32 /s pisogen.dll
lines to NetUserC2.bat file and then ran it, everything appear to be good, but continues with the same problems.
Ivan
Posted by: Shawn
Re: Isogen Ceaser 5.10 problem - 12/06/07 02:27 PM
Please call 281 890 4566 ext. 110. You can also send me e-mail too.
I will use online interactive help to check your machine.
Regards,
szhong@coade.com