Hanger Design Control Data

Hi there,

I was wondering if C2 has an option to transfer/insert the data of the hangers that selected by the C2 into the Hanger Spreadsheet(s).

In my case, after inserting the data of one of the hangers and running the analysis, I saw that the displacements and force on the hanger have changed. Therefore, I will try to insert all the hanger data into the spreadsheets to see the impact on the result.

[/LIST] [/LIST] The piping model is very big and has many hangers, GUIDEs, LIMs and Snubbers. To insert hanger data (spring rate and cold installation loads) will take too long time. I saw that PIPEPLUS piping software has this option and found it very useful. However, you still need to go through the each hanger input. However, it still saves time.

If someone know how to insert/transfer selected hanger data into the hanger spreadsheets, please let me know immediately.

Thanks in advance.

Ibrahim Demir

I forgot to mention that I know how to insert the spring rate and cold installation load into spreadsheet one by one. I am basically after an automatic information transfer from the hanger report into the spreadsheet.

Thanks for your patient.

Ibrahim Demir

At the present moment, there is no way to automatically transfer designed hanger data from the output back to the input.