Posted by: Rahul_Sapra
HOW TO REDUCE CODE STRESS RATIO VALUE - 11/01/14 12:11 AM
Can anybody guide me the method of lowering down the value of Code stress ratio in stress analysis report ?
I am getting a very high CODE stress ratio value due to which my CODE Stress check failed in Sustained & Expansion case.
Very much thankful for your help.
Regards
Rahul
Posted by: Richard Ay
Re: HOW TO REDUCE CODE STRESS RATIO VALUE - 11/01/14 01:01 PM
The Code Stress Ratio just shows the relationship between:
actual (Code) stress
--------------------- = Code Stress Ratio
allowable stress
So what you really want to do is lower the actual (computed) Code Stress. How you do this depends on the type of failure (over-stress):
1) If you are over-stressed in the Sustained (primary) case, you typically need more supports.
2) If you are over-stressed in the Expansion (secondary) case, you typically need more flexibility.
This sounds like you have a bit of work to do.
Posted by: Rahul_Sapra
Re: HOW TO REDUCE CODE STRESS RATIO VALUE - 11/07/14 05:09 AM
Sir thanks a lott for your valuable advice.
By applying this concept now my system stress passed in Sustain & Expansion case.
Regards
Rahul