about the MW kellog trunion desing
Posted by: Johane
about the MW kellog trunion desing - 05/02/06 07:37 AM
hi everybody,
Several months ago there were a discussion about the analysis of SIF´s in trunnions. i hope it´s not too late to ask for a copy of MW Kellog trunnion desing. Can anyone, please, send me this document to johanehb@gmail.com? Thanks and regards
Posted by: Ketil
Re: about the MW kellog trunion desing - 08/15/06 01:49 AM
With reference to the above post and to the previous thread covering discussion of trunnion design, I too would be profoundly thankful if anyone could send me a copy of the original MW Kellogg papers on trunnion design. My e-mail address is ketil.huseby@promech.no.
Regards,
Posted by: Darren_Yin
Re: about the MW kellog trunion desing - 08/15/06 10:25 PM
The echo of M.W. Kellogg’s trunnion design approach seems never to rest, despite more accurate, readily available WRC or FEA methods.
That said, the reputed reliability of its design, in all honesty, lies not so much in the stress analysis of it as in a Kellogg’s engineering practice.
Contrasting to many dummy-leg designers relishing to use “pin leg” pipe supports, Kellogg’s engineering practice as I recall requires that the diameter of a trunnion be always larger than half-size of the supported pipe. Coincidentally or not, none of Kellogg-designed trunnions have had reported failure.
Good stress analysis or good engineering practice?
Posted by: John C. Luf
Re: about the MW kellog trunion desing - 08/16/06 05:21 AM
Maybe both!!! They often go hand in hand!
Posted by: RBDF
Re: about the MW kellog trunion desing - 08/16/06 06:49 AM
Johane,
Please, call me 2046653
Regards, Roberto
Posted by: SUPERPIPER
Re: about the MW kellog trunion desing - 08/30/06 10:05 AM
hello all.
I'll dig out the copy i sent previously.
Plus i'll sent the revised version as promised.
Give me a day or two.
Posted by: giffordad
Re: about the MW kellog trunion desing - 08/30/06 07:49 PM
I would be very grateful if I could get a copy of the paper too. My email is adam.gifford@worleyparsons.com
Posted by: RAMKUMAR
Re: about the MW kellog trunion desing - 08/31/06 07:38 AM
Superpiper, Request you to send me a copy of original MW Kellogg papers on trunnion design if possible.
email: s_g_ramkumar@yahoo.com
Regards,
Posted by: Ed-Lamigo
Re: about the MW kellog trunion desing - 08/31/06 10:19 AM
Superpiper, may I request too copies of the documents you are mentioning including the revisions. I have too from some senior guys which seems to be a revised one from those early papers I got from Kellog. If yours are different, I'll email too scanned copies of the latest ones I got. Thanks a lot for your generousity. My email adress: Ed-Lamigo@cox.net.
Posted by: CraigB
Re: about the MW kellog trunion desing - 09/01/06 09:24 AM
Please send me a copy of this also. craig.biddle@wgint.com
Posted by: G P SenthilKumar
Re: about the MW kellog trunion desing - 09/02/06 12:41 AM
Superpiper please send to me a copy of above document.gpskumar22@yahoo.co.in
regards
Posted by: ichigo
Re: about the MW kellog trunion desing - 09/02/06 11:47 PM
hey, this is good reference... i surely appreciate if you could also send me a copy of it. prete@atomtech.com.tw
ty and regards,
Posted by: SUPERPIPER
Re: about the MW kellog trunion desing - 09/05/06 01:11 AM
Ok.
E-mailed as promised.
I look forward to some discussion on the contents.
Posted by: li2006
Re: about the MW kellog trunion desing - 10/09/06 08:07 PM
Originally posted by SUPERPIPER:
Ok.
E-mailed as promised.
I look forward to some discussion on the contents.
Posted by: li2006
Re: about the MW kellog trunion desing - 10/09/06 08:10 PM
Originally posted by SUPERPIPER:
Ok.
E-mailed as promised.
I look forward to some discussion on the contents.
Posted by: DORIN PETREA
Re: about the MW kellog trunion desing - 10/10/06 12:34 AM
Superpiper,I was following this subject in the forum and now becaouse it come up please send also to me a copy of the document in subject at:dorin.petrea@naoc.agip.it
I'll highly appreciate your effort,
Regards
Posted by: RBDF
Re: about the MW kellog trunion desing - 10/10/06 05:36 AM
Hello Superpiper
I appreciate if you could send me a copy of it.
My e-mail is: roberto.bonavino@inelectra.com
Regards, Roberto
Posted by: NKSharma
Re: about the MW kellog trunion desing - 10/16/06 01:32 PM
I would be very grateful if you could send me copy of the paper too. My email is nareshpandit@gmail.com.
thanx in advace.
naresh
Posted by: G P SenthilKumar
Re: about the MW kellog trunion desing - 10/17/06 12:43 AM
Hellow Naresh Sharma,
I will send you copy of the MW kellog trunion design manual at earliest.
regards
Posted by: midesoj
Re: about the MW kellog trunion desing - 11/21/06 02:50 AM
I need a copy too.
Please send it to adesoji.adegboyega@qed-international.com
Thanks
Posted by: Harish Karthik
Re: about the MW kellog trunion desing - 11/21/06 03:48 AM
Hi Superpiper,
I'll apreciate having a copy of this interesting document too. I think it would be better if you posted it on the forum. So anybody who wants could register and download a copy themselves.
My email ID is hashkart@gmail.com
thanks,
Harish.
Posted by: Harish Karthik
Re: about the MW kellog trunion desing - 11/21/06 03:48 AM
Hi Superpiper,
I'll apreciate having a copy of this interesting document too. I think it would be better if you posted it on the forum. So anybody who wants could register and download a copy themselves.
My email ID is hashkart@gmail.com
thanks,
Harish.
Posted by: Tushar Rajyaguru
Re: about the MW kellog trunion desing - 11/21/06 06:17 PM
SUPERPIPER
Please send me also at
tushar.rajyaguru@gmail.com
Thanks
Posted by: SUPERPIPER
Re: about the MW kellog trunion desing - 11/22/06 02:35 AM
Brain the size of a planet.................
Posted by: Richard Ay
Re: about the MW kellog trunion desing - 11/22/06 08:18 AM
I can't do this.
Posted by: SUPERPIPER
Re: about the MW kellog trunion desing - 11/22/06 08:47 AM
righty- o then..............
Posted by: John C. Luf
Re: about the MW kellog trunion desing - 11/22/06 07:56 PM
SuperPiper....
This method is quite old and is not nearly as current as the NC Cases... the NC cases are very conservative but widely used in the power industry....
The Author whom I have sipped an adult beverage with states the level of conservatisom was as requested by the sponsor.... EPRI
Both NC cases are published and described in WRC 448...
Posted by: T.S.Kim
Re: about the MW kellog trunion desing - 11/27/06 06:38 PM
Superpiper, please send me a copy of original MW Kellogg papers on trunnion design also. if possible.
E-MAIL : totojeff@hanmail.net
Best Regards.
Posted by: John C. Luf
Re: about the MW kellog trunion desing - 11/27/06 06:40 PM
Click the link in the post above!
Posted by: Rajkumar
Re: about the MW kellog trunion desing - 11/29/06 01:01 AM
i will be grateful in any one send me a copy of MW Kellogg papers on trunnion design
my email id is rajkmr_83@hotmail.com
Posted by: Rajkumar
Re: about the MW kellog trunion desing - 11/29/06 01:50 AM
i will be grateful in any one send me a copy of MW Kellogg papers on trunnion design
my email id is rajkmr_83@hotmail.com
Posted by: Captain Kenny
Re: about the MW kellog trunion desing - 11/29/06 05:56 AM
Does nobody actually read the previous posts?
The Kellogg Papers are available on page 3 of this topic in a post by the honourable Superpiper. Look for the words ATTACHMENT as a hint