PV Elite - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » PV Elite

Pressure Vessels

Please note, the current edition of PV Elite (including CodeCalc) is Version 2020 (v.22.00).

Click here to learn about the capabilities in PV Elite 2020.
For Vessel related articles, click here
For the PV Elite download page, click here.

Page 26 of 48

...

Forum Options

Subject / Poster	Replies	Views	Posted
Reinforcement calculation for Nozzle opening by Mech Engg	0	1234	05/31/10 09:18 PM by Mech Engg
MAPNC Calculation by Mech Engg	1	4655	06/01/10 01:21 PM by Ray_Delaforce
PV Elite for ASME Section VIII Division 2 by Mech Engg	5	6108	06/04/10 08:07 AM by Ray_Delaforce
Sealed joint verification in Intermediate strength bolts by Mech Engg	1	2140	01/21/11 08:18 AM by Ray_Delaforce
Flange with Ring Joint Facing by Mech Engg	2	3425	02/08/11 01:24 PM by Ray_Delaforce
Required thickness (Tr) of UCS-66 for Stress ratio by Mech Engg	0	1444	02/11/11 04:38 AM by Mech Engg
Minimum temperature at required thickness by Mech Engg	1	2062	04/21/11 04:35 AM by vishaltailor
K.B.Head by Mech Engg.	1	13767	05/17/05 12:04 PM by Ray_Delaforce
ASME tubesheet, Radial expansion by Mech Engg.	1	14956	07/14/05 10:23 AM by Mandeep Singh
Heat exchanger shell thk by Mech Engg.	3	16201	08/25/05 09:30 AM by Ray_Delaforce
General by Mech Engg.	9	39774	09/27/05 10:30 AM by Ray_Delaforce
Cladded tubesheet by Mech Engg.	1	19645	10/10/05 12:00 PM by Mandeep Singh
Weld Joint Efficiency by Mech Engg.	2	19057	10/16/05 06:20 AM by Chuck Becht
Coded vessels by Mech Engg.	4	28463	12/06/05 05:00 AM by abhijit d
External forces and moments in Flange analysis by Mech Engg.	1	12715	05/29/07 06:47 AM by Scott_Mayeux
mdmt by Mech Engg.	0	1176	12/20/11 11:45 PM by Mech Engg.
Important - Error in PVElite-MDMT calculations by Mech Engg.	2	3993	01/26/12 01:34 PM by Luis Sanjuan
Problems due to (Vortex shedding + Gust Response factor) by mechmohan26	1	2117	11/19/11 06:18 AM by mechmohan26
nozzle schedule by Med_ali	0	1766	05/28/13 08:59 PM by Med_ali
Minimum Nozzle Neck Thickness by mgo7	1	6093	02/02/10 08:41 PM by Mukesh
END CAP MODELLING by MGR	1	12170	04/09/07 06:50 AM by Scott_Mayeux
socket and theradolet is possible by MGR	0	11263	05/01/07 11:30 AM by MGR
Problem on the nozzle spacing for DIV II / PVELITE 2013 by mheng	1	2025	04/29/14 03:33 AM by mheng
PVElite User's Manual by Michael Faulkner	1	15454	01/16/02 03:17 PM by Richard Ay
Internal heads by Michael Faulkner	2	21493	06/27/02 11:57 AM by Michael Faulkner
half pipe jackets by Michael Faulkner	1	15122	05/05/04 04:19 PM by Ray_Delaforce
UG-99 lowest ratio by Michael Frohnert	3	14301	05/19/08 10:27 AM by Mandeep Singh
UG-33(f) by Michael Frohnert	3	3215	08/16/10 08:27 AM by Mandeep Singh
Section VIII History Lesson by Michael_Fletcher	2	2591	08/01/16 09:09 AM by Michael_Fletcher
ASME Tubesheet calculation by Michel	1	12510	04/07/06 06:35 AM by Scott_Mayeux
Maximum Allowable External Working Pressure by Miera81	5	12955	05/12/10 06:16 AM by Ray_Delaforce
Flange Rating by Miera81	16	16384	06/15/10 08:05 AM by Mandeep Singh
Impact Test Requirement On Div. 2 by Miera81	7	7112	10/20/10 08:17 AM by Ray_Delaforce
MAEWP by Miera81	3	3613	08/23/12 02:24 AM by SK Tan
Design Div 2 Class 1 Code 2017 Edition by Miera81	4	5252	03/21/18 08:21 AM by Kristin_Coyle
about PV-ELITE by mihai	2	19857	02/12/09 03:20 AM by mihai
Percentage Seismic For Hydrotest by mihir11	2	3620	11/12/09 09:21 AM by Mandeep Singh
Percentage Wind For Hydrotest by mihir11	1	2754	11/12/09 09:22 AM by Mandeep Singh
Fatigue Analysis by mihir11	1	2357	11/13/09 03:21 PM by Ray_Delaforce
PWHT in Cyclic Service by mihir11	2	3270	11/17/09 08:33 AM by Ray_Delaforce

Page 26 of 48

...

Moderator: Luis Sanjuan, Mandeep Singh, Ray_Delaforce, Scott_Mayeux