Duplex SS below 10mm thickness impact test - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » PV Elite » Duplex SS below 10mm thickness impact test

Topic Options

#64915 - 11/23/15 08:28 PM Duplex SS below 10mm thickness impact test
chadnansingh Member Registered: 05/28/11 Posts: 7 Loc: maharastra,pune	Hi, I am getting impect test expamption temperature for the duplex ss material UNS S31803 below 10 mm thickness as -195 degree centigrade but as per UHA 51(d)(3)it shall be -29degree centigrade. Regards Chandan Singh 009762189810 Edited by chadnansingh (11/23/15 08:31 PM) _________________________ With best regards Chandan Singh +91-09762189810 (Moblie) chandan.rubi@yahoo.com Being the best is not at all important; doing the best is all that matters.
Top

#64918 - 11/24/15 07:22 AM Re: Duplex SS below 10mm thickness impact test [Re: chadnansingh]
Ray_Delaforce Member Registered: 01/02/03 Posts: 743 Loc: Houston, TX	Hello Chandan Thank you for drawing this to our attention. In the ASME material database, we it seems have treated this a an austenitic steel when in fact it is not. I have drawn this to the attention of development for comment. _________________________ Sincerely, Ray Delaforce CADWorx & Analysis Solutions Hexagon PPM
Top