Circumferential butt joint angle calculation - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » PV Elite » Circumferential butt joint angle calculation

Topic Options

#31135 - 11/04/09 11:20 PM Circumferential butt joint angle calculation
mukesh jindal Member Registered: 11/04/09 Posts: 1 Loc: Gujarat	Dear All we are designing a vacuum vessel of 29m dia and 30m height. now problem is Circumferential U butt joint.I need the angle calculation of groove.Please tell me the reference data by which i could conclude and prove. _________________________ mukesh
Top

#31216 - 11/09/09 08:06 AM Re: Circumferential butt joint angle calculation [Re: mukesh jindal]
Ray_Delaforce Member Registered: 01/02/03 Posts: 743 Loc: Houston, TX	Hello mukesh The vacuum calculation is not influenced by the type of weld of the circumferential joint. Welded joints are defined in the WPS and if followed the final joint does not matter as long as it is sound. _________________________ Sincerely, Ray Delaforce CADWorx & Analysis Solutions Hexagon PPM
Top