Hi.

I need to represent the thickness of the insulation in the isometric in some way (which I define in the insulation view pallet on cadworx).

As you can see on the next pictures, on i-configure I can configure to represente the (1) Insulation Spec (that I define Settings on Isogen) and (2) Insulation type (that I define on insulation view pallet).

The parameter "Insulation Thickness" on i-configure doesn't correspond to Insulation thickness that I define on insulation view pallet. There is no value on that field when I extract the isometric.

http://prntscr.com/t2mu2u
http://prntscr.com/t2mthf

Do you know how to call the insulation thickness information to the isometric?
There may also be some option in the i-configure that makes appear the thickness near the drawing on isometric (and not necessarily in the legend, because the thickness can vary in the same isometric)

Thank you

I recall somewhere that there are some ATEXT values that will call this out on the Isometric Drawing Area.

If you want it populated to the titleblock, consider custom data and vlock attribute mapping.

So from trial and error we've discovered that the misc spec 1-5 are used for insulation.

misc spec 1 = thickness
misc spec 2 = density
misc spec 3 = mastic
misc spec 4 = jacket
misc spec 5 = user

Thanks! Unfortunately there isn't a more practical way to make it appear near to the line, but it worked with that atributes.