Okay, so yes, it is 2:00 in the morning and I should be in bed, but I've been running through this first pass on the hangers so I thought I would upload them to have folks take a look. They are imperial sizes 1/2"-18" and there are 3 different styles to work from. This is the H3 block. These work the same as the guides that we did, replace the H3 block in your support folder, then place off the Spring Hanger on the restraints tools onto the centerline of the pipe. Select 1 for the depth and size, then type in your description. a small 1/2" hanger comes in. Pick the hanger, select the dynamic grip and choose your style and size.

Here's a screen cap of what they look like:



And the link to the file:

http://cid-2bceccbe7007d995.skydrive.live.com/browse.aspx/CADWorx Plant Restraint Tools


Let me know what you think, how they work, and what I should change.

KP

Kyle,

I started working with the new guides and I can not transfer them to Isogen or find out how to place a description for the guides. What am I suppose to do ? Regardless they work great and I know you are still working with the guides so perhaps I'm to be more patiento.

Thanks

hangers works great, thanks, guess i will checkout the guides now

Excellent work Pope. This graphics will take a lot of tedious work out of laying piping out.

Thanks