Is there a way to get the FW callout to show on an iso adjoining the iso sheet the FW is placed on in the model? I get the continuation reference to the adjoining iso, but no FW callout.

Thanks

Are you using Iconfig? how are you placing a FW? theres a few ways to get it to show up. either flip the correct switch in iconfig or make sure the weld you are using shows "WF" for the skey

Still using CW 2014 & Project Manager (Upgrading soon).

I'm placing the FW as a weld component at the end of the pipe joined to a pipe from a different pipeline, so it's only associated to one of the sheets. The symbol shows up on the iso of that line, but not on the iso for the continuing line, so I don't think it's a problem with symbols. Hope that makes sense. Is there an iso switch for welds on continuing sheets?

the continuation sheet should show a dotted field weld on the other line since it was captured in the first line. do you have isogencontinuationgraphics turned on? if its only 1 weld it wouldnt show up on both lines or that would be 2 actual welds.

I havent been on 2014 for a few years im not sure when they added the continuation graphics setting in the config file.

I think that continuaution graphics were added with V2015. Sylv, what is the reason for using 2014 still ?

Yes, 2014 has continuation graphics, and I have the continuation graphics showing up for the adjoining fittings. I just expected to see the FW symbol on both isos. I'm coming from a PDS background where the FW symbol shows on both isos even though it's only associated to one of them. If CADWorx only can show it on the iso it's associated to then I can tell the user it's working as designed.

We are going to upgrade CADWorx now, just wasn't in a hurry because I have to upgrade 3 offices simultaneously.

Im going to go ahead and bump this up....

has anyone got FW callouts to show dashed on continuations to new line number or spools? not a sheet break but a new spool number.

another bump. does anyone have this working?