Angle of bent issue - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » CADWorx Solutions » CADWorx Plant » Angle of bent issue

Topic Options

#75164 - 11/17/20 02:16 AM Angle of bent issue
Mahefalison37 Member Registered: 01/12/12 Posts: 9 Loc: Madagascar	I performed autoroute command from a polyline containing angle slope and I got this message on command line: ''Angle of bent that will be created is too small''. I thought that I can solve this with changing skew pipe maximum angle but unsuccessful. Anybody can help please? Thanks. Mahefalison
Top

#75169 - 11/17/20 10:43 PM Re: Angle of bent issue [Re: Mahefalison37]
Vanman Member Registered: 02/03/06 Posts: 2884 Loc: JHB South Africa	This usually happens when the polyline has an angle of less than 1 deg. _________________________ Cadworx User
Top

Moderator: Dominik Hepp

0 registered (), 27 Guests and 2 Spiders online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM