Good Day,

How to insert a vertical Boot with Reinforcement pad and Nozzle in a Horizontal Vessel as shown in the image.

Appreciate your help.

It's been a while since I've tried to do that, but I believe I was able to add the boot as a nozzle, then if you have other connections on the boot, you can add nozzles to nozzles.

Thanks for the reply.

Can we connect dishend to the end of the pipe.

You could... but typically, if you use pipe, then you would use piping components, and same the other way, if its a piece of equipment, then you should use the equipment parts.

If you need a dishend on the pipe, I would modify a cap component in the spec and call it a dishend or create a user shape.