I have a problem for runing I-CONFIGURE(ALIAS LTD).
I can not setup drawing wizards, please help me to solve this error.
please see the attached file.

Hoang, you need to install voloview to use the drawing setup wizard.

See this extract from the helpfile

Pre-requisites


--------------------------------------------------------------------------------

Certain I-Configure features (Drawing Setup Wizard, Preview Drawing) require VoloView Express to be installed to function correctly, therefore the presence of VoloView on the workstation running I-Configure is a pre-requisite for use of the software.

Notes:

VoloView Express is produced by www.autodesk.com and is freeware.

It is supplied on the Alias Piping Solutions CD-ROM (here: Bin\Setups\AutoDesk Volo View).

Users who do not have access to any other 2D CAD system for isometric drawing production, can use VoloView Express to produce (DXF) drawings in any Alias Piping Solutions software application they use.



You can use this link.

http://images.autodesk.com/adsk/files/vv3setup.exe

Thank you so much.
Vanman, I have installed Vovoview express like your guide but it still can not active ( the same error). I am using Caesar II ( V5.2) and Cadworx plant pro ( V 2009). Please help me.

That error then is unregistered *.dll's. If you are using CADWorx 2009 I am not sure how to register them as I config only shipped with the 2010 release of CWX.

You can try running the isogen.bat file C:\CADWorx Plant 2009\Support directory to see if that fixes it, although I doubt it.

I have installed the Volo View Express 2.01 but I still have "Error number 429". My Caesar is 5.20, last build. Can you help me?

Regards,

Henrique

Henrique, have you tried running the netuserc2.bat from the C:\Program Files\COADE\CAESAR II 5.20 directory?

Try that, should register a whole bunch of *.dll's. Reboot and try again.