OK this one has me stumped. When some of my designers run an Iso they are getting a description on their bolts with the length on the bolt.

Example: STUD BOLT, ASTM A193-B7, W/2 HH NUTS ASTM A194-2H (7" LG)

When I run the Iso it comes out with out the length at the end.
Example: STUD BOLT, ASTM A193-B7, W/2 HH NUTS ASTM A194-2H

Same IsoGen File and version

Running CADWorx 2019.

Before I create a SR I just wanted to know if anyone has ran in to this.

A new setting in CADWorx for Nipples affects more than it intends.

Check the IsogenAppendNippleLength in the CADWorx Plant Setup.

I tried that first. I am still looking for the fix.

Try setting ATEXT value -538 = ?x?

-538 is already set to ?X?. So here is the Update. If the user selects the FLS file in the SETUP and then runs the Iso then the Length is not in the long description. Only when it is default is set. SR has been submitted. It is a problem with CADWorx 2019 because CADWorx 2017 does not have that problem.