I am running CADWorx 2016, trying to turn off boxes around the text at olets and reducers. I have tried suppressing -552 and -553 with no luck. Can someone point me in the right direction? The text below the box I want to suppress. The text in the box I want with no box.
Thanks for your help!

[img]https://imgur.com/a/jwIIY9A[/img]

Try Atext -550 and -551.

Thanks for the suggestion but it didn't work. Any other ideas?

https://imgur.com/a/oNBxH0X


Thanks for your help!

Have you perhaps got a sample model you can upload here ? The issue is either model related or style related.

I figured it out finally. I have recently started using 2016 and imported my specs from 2012. In 2012 I used the tag field to populate that info to my isos. Once I cleared the tag field boxed text went away. I added RED TEE to -550 and it doesn't show up? Is there a way to change the way the reduction size is displayed. Instead of 8X6" I would prefer 8"x6". How do I upload model?

test

If I recall correctly there is a I-config defect with 550/551 being switched around.

What you are wanting to do with the 8"x6" is not possible.