While using Caesar for EN1591 flange check, there is no input requirement for bolt tightening torque. any reason for this or the code not asking for this?
Registered: 12/13/99
Posts: 6226
Loc: Houston, Texas, USA
The bolting torque is defined by the bolt-up method: eps = 0.1 + 0.5 * Mu. There is "help text" on each of the input fields that will explain this further.
Attachments
Description: Bolt EN-1591: Flange DN80 P16 Bolt
_________________________
Regards, Richard Ay - Consultant